Power Industrial Laser Diodes for Material Processing & Laser Cutting Applications

The low noise LD15CHA – the newest addition to the Wavelength laser diode driver line – offers exceptional modulation bandwidth, and ample power for materials processing, industrial laser cutting, and laser diode bars / stacks.

The small laser diode driver delivers 15 A output current up to 28 V. It meets laser compliance requirements from 3 V with a single 5 V supply, and up to 28 V with an additional 30 V power supply. Additional models are available with 2.5 A, 5 A, and 10 A output. This product family supports A & B type laser diodes. Three photodiode current ranges are available.

NEW: 15A / 20V PRECISION TEMPERATURE CONTROL INSTRUMENT

The TC15 LAB (15A, 20V) is an ultra-stable digital controller for thermoelectrics and resistive heaters where tight temperature stability is required. Designed using the latest technology, stability better than 0.0009°C can be achieved with thermistors. Precision temperature control is required in myriad applications. This high?powered controller makes development of complex systems or sophisticated experiments possible in biological sample control, laser diode or quantum cascade laser wavelength stabilization, spectroscopy, remote sensing, imaging, aerospace, communications, materials processing, pharmaceutical manufacturing control, environmental sensing, electro-optics, and more.
ULTRA-STABLE TEMPERATURE CONTROLLER

This best-in-class temperature controller offers:

  • Excellent stability (0.0009°) at 15 Amps up to 20 Volts to a thermoelectric or resistive heater
  • Intuitive touchscreen front panel – see setpoint, actual temperature, stability status all on one screen!
  • Extra safety — shut down your laser / QCL / active load if it goes outside user set temperature limits. Auxiliary sensor can monitor heat sink temperature.
  • Expanded Remote Command set — control and log data from a remote computer via USB (Test & Measurement Class) or Ethernet
  • Free LabVIEW VI executable for easy remote computer control
  • IntelliTune® optimizes PID control values to minimize time to temperature or reject external disturbances
  • IntelliTune®keeps adapting the PID control values as setpoint, tuning mode or sensor bias current is changed
  • Compatible with all sensors — thermistor, RTD, LM335, AD590.
SAFETY IS BUILT IN

Over and under temperature limits as well as positive and negative current limits can be set. If the sensor signal is lost or a short is detected at the thermoelectric, output current is disabled. If temperature limits are exceeded, a signal to the active laser load can be sent to disable its current. For example, connect the LD Shutdown BNC output to the Active Lock input on Wavelength’s QCL LAB driver and the QCL current will shut down if temperature limits are exceeded. An Auxiliary Sensor can be used to monitor the temperature of the system heatsink.

INTELLITUNE

Instead of long, manual calculations to derive the optimal Proportional, Integral, and Derivative [PID] control terms for a load, press the IntelliTune icon and the instrument will automatically cycle through a characterization test to tune the control terms for best performance. Two methods of IntelliTune are available. Setpoint Response optimization will minimize the time to temperature for the load. Disturbance Rejection optimization is best when there will be significant changes to the ambient temperature or operating condition. This could be for a pulsing laser diode where the active heat load changes or a sample that is to be tested in changing ambient temperatures. For detailed exploration of IntelliTune, download Application Note AN-TC13: IntelliTune vs. Conventional Autotune.

Take your research to the next level.

For more information, download the datasheet.

A QuickStart video simulates controlling temperature for a spectroscopy application using a laser with an embedded 3A thermoelectric and a 10kΩ thermistor. It takes you through all the steps necessary to control the laser temperature quickly and easily.

October 2017

Temperature Control System Design with Multiple TECs, Field Deployment of Raman Difference Spectrometer, Quantum Dots for DNA labeling, Using a Drone to Detect Methane, New FAQs

Continue reading

Safely produce consistent, optimum power from your laser diode

The LDMOUNT is ideal for pump and communication diode lasers. The LDMOUNT from Wavelength Electronics is designed for optoelectronic modules in a 14-pin butterfly package that require up to 5A. With integrated heatsinking, built-in safety features, and easy connection to eight different high performance Wavelength controllers, the LDMOUNT can be used in a variety of applications, mounted on an optics table or to a chassis.

FEATURES & BENEFITS
  • Capable of running lasers up to 5 A
  • Compatible with 14-pin butterfly laser diode packages
  • Type 1 & Type 2 butterfly packages are supported with pre-soldered connection card
  • Other laser types supported with customer soldered Custom Butterfly Card
  • Zero insertion force (ZIF) socket holds laser diode
  • Laser interlock safety circuit
  • Mounts to an optics table with standard 1/4-20” screw
  • Compatible with 8 Wavelength temperature controllers and laser drivers
VERSATILITY

Designed for 14-pin butterfly laser diodes with internal thermistors and Thermo Electric Coolers (TEC), the LDMOUNT is a laser diode mount with integrated heat sinking, and simple connections between the drivers and the diode laser. A zero insertion force (ZIF) socket holds the laser. Two 9-pin DSUB connectors enable TEC and laser driver control. Two basic butterfly laser diode types are supported. For any other pinout, the LDMOUNT-CU Card is available for hand wiring.

The LDMOUNT is designed for use with laser diodes that have the laser diode anode (LDA) grounded. As such, the laser diode cathode (LDC) is at a negative potential. The LDMOUNT is designed to operate at temperatures below 50°C. The user is able to change between the types easily by using the provided pre-configured connection card.

SAFETY

The LDMOUNT has several built-in safety features. These include a reverse bias protection diode across the laser diode, an interlock circuit for the laser diode current, and a TEC Active/Bypass switch to require active temperature control before laser current can be enabled.

Wavelength Electronics is a Proud Member of MPIA – Promoting Photonics in Montana

The Montana Photonics Industry Alliance serves as a hub for Montana’s optics and photonics companies, entrepreneurs, laboratories, and universities to commercialize, grow and sustain globally leading organizations that create high quality jobs and economic opportunity in Montana.

MPIA
  • Supports initiatives designed to start, grow and attract new optics and photonics companies to Montana
  • Promotes optics and photonics job opportunities in Montana to attract top quality professionals to the state
  • Supports efforts to build the state’s optics and photonics technology research base
  • Exchanges information about common issues and opportunities
  • Pools resources to support joint training, research and development and business development projects that advance the competitiveness of Montana optics and photonics companies
  • Educates the public and students about optics and photonics career opportunities
  • Serves as an interface between Montana optics and photonics companies and state educational institutions
  • Serves as the interface between Montana optics and photonics companies and state government
The video highlights reasons to locate a Photonics business in Bozeman, MT. It was shown at Laser World of Photonics in June 2017.

June 2017

Utilizing QCLS for Gas Sensing, AN-TC14: Calibration Coefficient & Thermistor Selection, LDMOUNT, TC LAB Series Video & LabVIEW VI, AN-LDTC08: Product Selection & Comparison, TC15 LAB

Continue reading

VIDEO: TC LAB Series Temperature Control Instrument Quick Start

This video will help you quickly operate the TC LAB instrument. In this video, we will simulate controlling laser temperature for a spectroscopy application. Embedded with the laser is a thermoelectric with a maximum current of 3A and a 10kΩ thermistor.

Photonics West 2017 – What’s New

Come visit us at booth #908 at Photonics West January 31 to Feb 2 in San Francisco. We‘ll have several instruments operating so you can experience the touchscreen interface and see how simple operation can be!
 
QCL LAB low noise Quantum Cascade Laser drivers (up to 2A 0.4nA / √Hz noise floor) now are TMC class and we’ve released a Labview Virtual Instrument and full Command set. See how to get your free firmware upgrade.
 TC LAB Temperature Control instruments (5A & 10A; 15V) with IntelliTune: Intelligent Autotune. With one quick scan, your thermoelectric stays optimally controlled even if you change setpoint or tuning mode.
QCL + PTC OEM current and temperature control for a Quantum Cascade Laser.
 
In one compact package, QCL10PTC10, you get safe, low noise control of a 1A Quantum Cascade Laser (0.5µA RMS to 100kHz), and up to 10A of precision temperature control with stability better than 0.0012°C.
 
Our team of engineers would love the opportunity to talk with you about your application. Feel free to make an appointment ahead of time if you’d like to look more in-depth at your project.